by Nick Gromicko
Posted by Action Plus Home Inspections
- uneven tiles. Examine the tiles to see how level they are in relation to each other. Uneven tiles probably weren’t set correctly in the mortar, and reinstallation may be necessary;
- cracks, loose tiles and splitting. Cracks in ceramic tile are the result of movement in the tile underlayment, excessive expansion or contraction of the building during freeze-thaw cycles, abuse, or improper installation. Minor cracks can be repaired with grout that matches the color of the tile, but larger cracks may require replacement of the tile;
- crazing. If tiles were cooled too quickly after kiln-firing, they can develop fine surface cracks, most often appearing as a fine, web-like network akin to cracked ice. Crazing is much more common in older, historic tiles than in modern tiles, but it still happens today. Crazing increases the rate at which tiles hold dirt, leading to discoloration; and
- cracked or discolored grout lines. Unsealed or improperly sealed grout will readily absorb moisture from the air or standing water, especially around showers and sinks. Some types of porous tiles may actually powder or spall if subjected to constant moisture. Damaged or discolored grout can be removed and replaced.
Natural stone tiles have a beauty that is difficult to recreate. They add an air of elegance and character to any home. Stone is more durable than ceramic tile, too, as it’s less likely to scratch, and holds up well under foot traffic. The unique and complex patterns can appear busy and overwhelming in large, empty rooms, however. Stone is also more difficult to maintain than ceramic tile. The following maintenance and repair tips are recommended:
- Apply an impregnating sealant. An oliophobic sealant will repel both oil and water, and it’s especially helpful in the kitchen. Try to use a solvent-based sealant, as they’re generally better than water-based varieties.
- Quickly clean up any acids. Some of the more common stone tiles are marble and limestone, which are calcite-based, meaning that they will corrode when exposed to acids, such as vinegar or lemon juice. Unfortunately, sealants cannot protect stone against these substances, which will etch into the stone if left standing. Igneous stones, such as basalt and granite, as well as ceramic tile, are less vulnerable to acid damage.
- Lay walk-off mats or area rugs on either side of exterior entrances and instruct people to wipe their feet before they enter the home. The main cause of surface scratching on stone floors is dirt from outside that becomes caught under shoes and scraped across the floor. Scratching can dull the stone’s natural polish and damage its natural crystals, causing it to lose its shine and reflection.
- Use a good-quality stone soap, preferably one containing linseed oil, for regular maintenance and cleaning. In most cases, you can simply mop the soap and leave it to dry.