By Bud Coburn
Different Types of Space Heaters
- coil-based convection heaters: This type of heater uses a fan to push air into a room that has been heated internally by passing through hot metal coils. These heaters utilize a safety mesh in order to ensure that nothing in the room will come into contact with the internal heating elements.
- ceramic-element heaters: This type is generally considered safer to operate than a coil-based unit. Since the ceramic core is larger than heating coils, these units can operate at a lower temperature while providing an equivalent amount of heat that spreads over a farther area. This type of heater is also able to maintain a higher temperature for a longer period of time compared to a coil-based unit, which makes it more efficient.
- oil-filled radiators: These heaters are highly efficient and operate silently because they do not use a fan. Instead, they use fluid contained in a permanently sealed radiator apparatus, which does not ever need to be refilled. The oil is heated within the unit, and the heat from the oil then radiates into the room. Once heated, the oil will continue to gradually release warmth into the room even when the internal heating element is turned off.
- halogen lamp heaters: Energy-efficient halogen bulbs are used in these types of space heaters to provide instant warmth at the touch of a button. They are made safe by employing safety grilles and cool cabinets, and can be especially appropriate in areas where small children or pets are of concern.
Estimating the Cost of Operation
The operational costs of space heaters depend on the type of heater in use, as well as the room it is being used to heat. “Kilowatts x Rate x Time = Cost” is a useful formula, in general, to determine how much a heater will cost to run. Here is how the formual breaks down:
- kilowatts: the setting of the heater. Divide watts by 1,000 to get kilowatts per hour;
- rate: the cost of electricity per kilowatt-hour, which can be determined for an area by contacting the local utility company; and
- time: the amount of time the heater is in use.
(1,500w ÷ 1,000) x $0.10 kWh x 10 hours = $1.50.
Space Heater Safety
Since space heaters can generate extreme temperatures at the surface, they have the potential to be dangerous and even cause injury. Although they are safe when operated correctly, it is estimated that 25,000 residential fires and 300 deaths are associated with the use of space heaters every year. When using a portable space heater, following these safety precautions, as well as any guidelines recommended by the manufacturer of the unit, can lessen the risk of accident or injury.
- Use only the type of fuel or energy intended for use with the specific device. The use of gasoline in a kerosene heater, for example, would be very dangerous.
- Never attempt to repair or replace parts in a heater yourself. This should always be handled by a qualified service center, since the results of repairing a malfunctioning unit could be dangerous.
- Use of extension cords for the power supply should be avoided. A cord marked 14 or 12 AWG can be used if absolutely necessary.
- Do not use space heaters in wet or moist areas, such as in a bathroom.
- Always keep heaters level and on the floor. If a heater has been placed on furniture and it falls off, or if a table it has been placed on collapses, the damage to the unit could result in a fire or shock hazard. Some units contain a tip-over switch which automatically shuts the power off if the unit is knocked over, but even these should be situated in such a way that they will not be at risk of falling over.
- If the surface of the unit has a high operating temperature, there should be a guard around the heating element to keep people, pets and combustibles a safe distance away from it.
- The unit should have an indicator light to signal when it is plugged in or turned on.
- Be sure to install the correct size unit for the space to be heated. Too large or small of a unit may actually decrease energy efficiency, or could cause pollutants.
Other Factors to Consider
- What area of the building will the heater be used in? Be sure to select an appropriate unit for the area, and carefully consider whether this area will really benefit from use of a portable heater to begin with. For example, heating a room that is generally too cold but not often used anyway would simply suck energy without much return on savings.
- Space heaters that include a thermostat are more efficient than models that do not.
- If the unit doesn’t have a thermostat, utilize the different settings on it for maximum efficiency. Once a heater has adequately heated a room at full power, turn the setting lower to maintain current levels, rather than adding more heat to an already warmed room.
- Select a heater with appropriate safety features for the application. For example, a heater that achieves extremely hot surface temperatures may not be a good choice in an area where small children are present.
- The surface temperature of the heater can also be an issue in areas where combustibles might be found in close proximity to the unit.
- Some units that use a fan can be noisy, which may be an issue in certain circumstances, and should be taken into account during the selection process.